Forward seats and floor panels

Using the same method, the patterns were made and plywood cut for the forward seats and the floor panel half sections.

I had a larger version of my joggle stick for cases like this. A longer reach for my template.

The patterns were left long on the outside edges to be trimmed while planking.
It went smoothly with only slight variation in port and starboard side panels. All of these panels for seats and floor boards we put aside for final trimming as planking goes on. Another 4 sheets of 3/8" plywood is in the basement awaiting cutting.
(pictures to follow)

Time: 6 hr (over a span of 2 days)