With the second coat of epoxy applied to the transom and rudder today, I needed some more to do to fill the day (That didn't involve making a lot of sawdust)
I cut some 6 oz cloth and laid out the first layer for the center board. I figured i'd lay it flat so the epoxy would stay on the board and not drip all over the floor. The board got a heavy sanding so the cloth and epoxy would stick well.
The epoxy wets out the glass cloth pretty good. When dry I'll trim off the excess and do the other side, and alternate back and forth.
Time: 1 hr
No comments:
Post a Comment