Monday, January 5, 2009

Centerboard case

The centerboard and centerboard case were line drilled so when finished the pin will fit properly. A 1/4" bit was used and will be enlarged later for the ore-lock sockets.
The centerboard case had a coat of 6 oz fiberglass applied to the inside.
It's my first time working with epoxy resin and cloth. The Interlux brand "Epiglass 9000" wets into the cloth very easily, and the temperature I work at makes for a long pot life for me to get my work done. I'm impressed with it so far.

Time: 1 hr

No comments:

Post a Comment